抽采孔液态CO2预裂效果显微CT实验研究

为研究液态CO2预裂爆破后,煤体内裂隙发育情况,采用高精度微焦点显微CT系统,对预裂后不同区域的煤样进行CT扫描,并利用Photoshop进行孔裂隙占比统计学分析。研究结果显示,距预裂孔4 m处的煤体裂隙发育明显,孔裂隙占比增加了一倍,而在5 m处的煤体裂隙则发育较弱。表明抽采孔内采取液态C2预裂技术后,4 m范围内的煤体裂隙得到了充分发育,为瓦斯抽采提供了有利条件。     

Novel hybrid serpentine-interdigitated flow field with multi-inlets and outlets of gas flow channels for PEFC applications

In our previous study, a novel flow field design for a polymer electrolyte fuel cell (PEFC) called “Hybrid Serpentine-Interdigitated (HSI)” had been proposed. Although it was very promising in terms of performance and pressure drop, it still had a major drawback of the low oxygen concentration area. To improve its design and performance, three HSI configurations with different numbers of gas inlet and outlet, namely one inlet and one outlet HSI (1-IO HSI), one inlet and two outlets HSI (1I-2O HSI) and two inlets and two outlets HSI (2-IO HSI) were numerically investigated and compared with the conventional single channel serpentine (1S). The investigation on the cell performance and other transport behaviors has been carried out using CFD techniques via ANSYS FLUENT software. At a practical operating potential of about 0.6 V of 50 cm² PEFCs, the 2-IO HSI offered the best distributions of oxygen, current density and water due to the shorter channel length. More importantly, the 2-IO HSI could contribute to a reduction in cathode pressure drop by 90%, as compared with the 1S, resulting in the enhancement in the net power output by 6%, approximately.     

里必井田承压水带压开采评估

煤层底板承压水突出是发生水害事故的原因之一,要减少该类事故的发生,需对底板突水危险性进行准确评价。为保障里必井田承压水带压开采的安全进行,基于煤层底板突水研究理论分析,采用常规突水系数法和等效厚度突水系数法,分别对里必井田内3#煤和15#煤的奥灰水突水危险性进行了研究。研究发现,奥灰水对于3#煤的开采影响不大,但在局部构造及陷落柱发育地段及采区东北部区域仍存在一定的突水可能性;奥灰水对15#煤开采具有较大威胁,大部分区域具有较大突水危险性。等效岩层厚度法计算的突水系数考虑了不同性质岩层的岩石强度和阻水能力,计算更接近生产实际,结果更可靠;且在对突水系数法进一步优化后,其评价的结果可以更精确。     

Impact of applied cell voltage on the performance of a microbial electrolysis cell fully catalysed by microorganisms

The effect of the operating voltage on the performance of a microbial electrolysis cell (MEC) equipped with both a bioanode and a biocathode for hydrogen production is reported. Chronoamperometry tests ranged between 0.3 and 2.0 V were carried out after both bioelectrodes were developed. A maximum current density up to 1.6 A m⁻² was recorded at 1.0 V with hydrogen production rate of nearly 6.0 ± 1.5 L m⁻² cathode day⁻¹. Trace amounts of methane, acetone and formate were detected in cathode's headspace and catholyte which followed the same trend as hydrogen production rate. Meanwhile substrate consumption in anolyte also followed the trend of hydrogen production and current density changes. The bioanode could utilise up to 95% of acetate in the tested voltage ranges, however, at a cell voltage of 2.0 V the bioanode's activity stopped due to oxygen evolution from water hydrolysis. Cyclic voltammograms revealed that the bioanode activity was vital to maintain the functionality of the whole system. The biocathode relied on the bioanode to maintain its potential during the hydrogen evolution. The overall energy efficiency recovered from both bioanode and external power in terms of hydrogen production at the cathode was determined as 29.4 ± 9.0%, within which substrate oxidation contributed up to nearly 1/3 of the total energy marking the importance of bioanode recovering energy from wastewater to reduce the external power supply.     

Four different configurations of a 5 kW class shell-and-tube methane steam reformer with a low-temperature heat source

The methane steam reforming reaction is an extremely high endothermic reaction that needs a high temperature heat source. Various fuel cell hybrid systems have been developed to improve the thermal efficiency of the entire system. This paper presents a low temperature steam reformer for those hybrid systems to maximize the utilization of energy from a low temperature waste heat source. In this study, the steam reformer has a shell and tube configuration that is divided into the following zones: the inlet heat exchanging zone, the reforming zone and the exit heat exchanging zone. Four different configurations for methane steam reformers are developed to examine the effect of heat transfer on the methane conversion performance of the low temperature steam reformer. The experimental results show that the overall heat transfer area is a critical parameter in achieving a high methane conversion rate. When the heat transfer area increases about 30%, the results showed elevated dry mole fractions of hydrogen about 3% with about 30 °C rise of reformer outlet temperature.     

The Influence of Digital Multimedia Communication Forms on Graphic Design

Today, highly sophisticated technology has changed the lives of most individuals worldwide. In the field of graphic design, the emergence and development of digital multimedia communication forms have had a crucial impact on the creative process of graphic design and even the process of communication, offering more opportunities and more exciting challenges to this domain. And with the continuous improvement of people’s material culture and spiritual culture, the digital age has enriched people’s production and life. Especially in the application of digital multimedia in graphic design, the changes caused by the emergence of digital multimedia focus mainly on the visual expression. With the continuous application of digital multimedia communication forms, the graphic design closely related to it has been affected to some extent. In order to meet the changing data needs of people, graphic design has also begun to adjust accordingly. Therefore, this paper analyzes the relationship between digital multimedia and graphic design from the perspective of art design, systematically determines the relationship between multimedia and graphic design specific design subjects, and studies the influence of digital multimedia technology on graphic design.     

Exploring design trade-offs for achieving social inclusion in multi-tiered design problems

ABSTRACT

The digital age of the future is ‘not out there to be discovered’, but it needs to be ‘designed’. The design challenge has to address questions about how we want to live, work, and learn (as individuals and as communities) and what we value and appreciate, e.g.: reflecting on quality of life and creating inclusive societies. An overriding design trade-off for the digital age is whether new developments will increase the digital divide or will create more inclusive societies. Sustaining inclusive societies means allowing people of all ages and all abilities to exploit information technologies for personally meaningful activities. Meta-design fosters the design of socio-technical environments that end-user developers can modify and evolve at use time to improve their quality of life and favour their inclusion in the society. This paper describes three case studies in the domain of assistive technologies in which end users themselves cannot act as end-user developers, but someone else (e.g.: a caregiver or a clinician) must accept this role requiring multi-tiered architectures. The design trade-offs and requirements for meta-design identified in the context of the case studies and other researchers’ projects are described to inform the development of future socio-technical environments focused on social inclusion.     

同频段混合信号中的无人机信号盲检测识别

无人机信号的探测识别技术是应对无人机黑飞滥用的关键技术之一。在实际信号监测环境中，经常会接收到多个信号的混合信号，它们在时域和频域上混叠且各信号分量调制样式相同。为解决在同频段混合信号中检测识别出无人机信号的问题，提出了一种通过谱特征分析判断无人机信号存在性的方法。分别采用基于二次方谱特征的无人机图传和WiFi混合信号检测识别算法以及基于频谱带宽特征的多无人机混合信号检测识别算法，通过对射频电路采集的信号进行仿真验证，实现了从同频段混合信号中检测识别出无人机信号分量。理论分析和实验测试结果证实了所提检测识别算法的有效性。     

基于Spider卷积的三维点云分类与分割网络

针对传统的卷积神经网络（CNN）不能直接处理点云数据，需先将点云数据转换为多视图或者体素化网格，导致过程复杂且点云识别精度低的问题，提出一种新型的点云分类与分割网络Linked-Spider CNN。首先，在Spider CNN基础上通过增加Spider卷积层数以获取点云深层次特征；其次，引入残差网络的思想在每层Spider卷积增加短连接构成残差块；然后，将每层残差块的输出特征进行拼接融合形成点云特征；最后，使用三层全连接层对点云特征进行分类或者利用多层卷积层对点云特征进行分割。在ModelNet40和ShapeNet Parts数据集上将所提网络与PointNet、PointNet++和Spider CNN等网络进行对比实验，实验结果表明，所提网络可以提高点云的分类精度和分割效果，说明该网络具有更快的收敛速度和更强的鲁棒性。